Want To Buy Hardened Auger Teeth? Look Out For These Technologies

Want To Buy Hardened Auger Teeth? Look Out For These Technologies

When buying drilling cutter tools, one of the key things that you need to consider is the tools’ hardness. The harder the tools, the better because they can withstand rough and tough drilling conditions. However, you need to be very careful when it comes to select hard tools. Most people confuse the quality of the material and the cutter tools’ hardness, which are two different things.

For auger teeth hardness, you need to look for several technologies used for auger teeth hardening. Here are three of the best technologies that manufacturers use to harden their tools.

Tungsten Carbide Hardfacing

Tungsten card hardfacing is without doubt one of the most popular tool hardening techniques in the market today. It is a process where manufacturers use tungsten carbide material to harden the tools. A coating of tungsten carbide is placed on another metal, which is softer to improve the tool’s hardness. Tungsten carbide hardfacing is usually where the base metal is a little bit softer may not deliver in tough and rough condition. Therefore, it makes the tools more productive and withstands abrasion conditions for longer. The cutting performance of the teeth is significantly improved.

Brazing Tungsten Carbide

Braze tungsten carbide is another hardening technology that you need to look out for when buying hardened auger teeth. It is widely being used by most manufacturers, although the quality may vary. The technology is being used to make auger teeth joints. The joining of the carbide tip and the alloy steel body requires a very strong joint that can withstand heat, impact and more so applied force by the auger. Braze tungsten carbide is one of the best technologies for making such joints. That is why it is one of the techniques that you need to look for in auger while buying.

Heat Treatment

Heat treatment could be one of the oldest techniques for hardening metallic tools. It has been used by even the early many to make tools. It is also one of the popular techniques of machine tools manufacturers. However, over the years, the technique has greatly improved, especially with the invention of specialized equipment. Today, most factories are using heat treatment to harden their tools. By heating auger teeth at a high temperature, they are hardened to withstand tough and rough conditions. The cutting performance of the tools is also improved significantly with heating.

Check out for any of these three auger teeth hardening technologies if you want to get hardened tools. However, all auger teeth joints must be made from brazing tungsten carbide.

Leave a Reply

Your email address will not be published. Required fields are marked *